Currently only for the Harley-Davidson touring models.
Available in several different heights for standard height and lowered suspensions.
Limited lifetime warranty.
Mounts to the frame with one bolt in less than five minutes with a 3/4 inch wrench.
EZ-OFF by simply placing the bike in gear and driving off.
Because the rear tire is not completely off the ground the bike can be driven off of this stand, unlike other makes.
This EZ-UP stand allows the rider to easily place the bike on the stand while still on the bike.
No frame or bike modification required.
The load carrying points are only on the bottom of the frame rails.
Maintenance free stand with I-Glide self lubricating bushings at the pivot locations.
Zinc plated axle
Stainless steel springs
Powder coated to match the frame
Can be custom painted with any available color by special order
Made in the U.S.A.
Patent Pending.
When ordering, please state the model name or code, year of manufacture and if the bike has been lowered (front and back or back only) or is stock height.
For example, you may have 2012 CVO Ultra Limited Electra Glide which has been lowered at the back only.
That would be FLHTCUSE 2012 Lowered Back only.
Note: If your bike has Kuryakyn adjustable passenger pegs part #7926, with the extended passenger board mount part #4537 which moves the left side foot board out in order to clear the Rinehart true dual exhaust systems you will need to call us as they make a special version for this setup with the foot lever on the right hand side. We build these in any height needed. Cost is still the same but it will add a few days for shipment.
Available in several different heights for standard height and lowered suspensions.
Limited lifetime warranty.
Mounts to the frame with one bolt in less than five minutes with a 3/4 inch wrench.
EZ-OFF by simply placing the bike in gear and driving off.
Because the rear tire is not completely off the ground the bike can be driven off of this stand, unlike other makes.
This EZ-UP stand allows the rider to easily place the bike on the stand while still on the bike.
No frame or bike modification required.
The load carrying points are only on the bottom of the frame rails.
Maintenance free stand with I-Glide self lubricating bushings at the pivot locations.
Zinc plated axle
Stainless steel springs
Powder coated to match the frame
Can be custom painted with any available color by special order
Made in the U.S.A.
Patent Pending.
When ordering, please state the model name or code, year of manufacture and if the bike has been lowered (front and back or back only) or is stock height.
For example, you may have 2012 CVO Ultra Limited Electra Glide which has been lowered at the back only.
That would be FLHTCUSE 2012 Lowered Back only.
Note: If your bike has Kuryakyn adjustable passenger pegs part #7926, with the extended passenger board mount part #4537 which moves the left side foot board out in order to clear the Rinehart true dual exhaust systems you will need to call us as they make a special version for this setup with the foot lever on the right hand side. We build these in any height needed. Cost is still the same but it will add a few days for shipment.
Pin Grips (4)
EZ-UP Center Stand (2)
Lifetime Oil Filters (34)
Luggage and tool bags (12)
Handling (1)
Action Cameras (1)
